Inicio Academia Guías Cómo hacer puentes de cripto

Cómo Conectar Criptomonedas Entre Cadenas

Move tokens from one blockchain to another without an exchange. This guide explains how bridges work, which bridge to use for which route, what it costs, and how to avoid the common mistakes.

11 min de lectura Actualizado en septiembre de 2026 DeFi

¿Qué es un puente cripto?

A crypto bridge is a protocol that moves tokens from one blockchain to another. Blockchains such as Ethereum, Arbitrum, Base and Polygon are separate networks, each with its own state and transaction history. They cannot read each other's data. Bridging is the mechanism that carries value across that gap.

Without bridges, moving assets between chains would mean selling on one chain, going through an exchange, and buying again on the other. A bridge lets you transfer tokens straight from your wallet, usually in a single transaction that completes in minutes.

Los puentes son importantes porque la actividad se distribuye entre muchas cadenas. Layer 2 rollups como Arbitrum y Base cobran comisiones de gas más bajas que Layer 1 Ethereum, pero tus activos tienen que llegar allí primero. Ya sea que quieras DeFi más barato, un exchange de Layer 2 o reunir tokens dispersos entre cadenas, un puente es la herramienta para el trabajo. Ethereum.org mantiene una descripción general de los diseños de puentes y sus ventajas y desventajas (ver Fuentes).

Transferencias entre cadenas

Move ETH, USDC and other tokens between Ethereum, Arbitrum, Base, Optimism and Polygon, usually in minutes.

Acceder a tarifas más bajas

Bridge to Layer 2 chains, where a transaction costs a fraction of the same transaction on Ethereum mainnet. Learn about gas fees.

No custodial

Bridge directly from your wallet. No exchange account is needed, and you keep control of your keys throughout.

Cómo funcionan los puentes de criptomonedas

All bridges solve the same problem: blockchains cannot read each other's state. Each bridge uses a different method to verify that a deposit happened on the source chain before releasing tokens on the destination chain. Knowing the method tells you what you are trusting.

1

Bloqueo & Emisión

The most common design. You deposit (lock) tokens in a smart contract on the source chain. The bridge verifies the deposit and mints the same amount of wrapped tokens on the destination chain. The wrapped tokens are a claim on the locked originals.

For example, when you send ETH from Ethereum to Arbitrum through the canonical Arbitrum bridge, your ETH is held in the Arbitrum bridge contract on Ethereum and the same amount of ETH is credited to your address on Arbitrum. Bridging back reverses the process: the ETH leaves Arbitrum and the original ETH is released on Ethereum (see the Arbitrum docs in Sources).

2

Quemar & Liberar

The reverse of lock and mint. Wrapped tokens on the destination chain are burned (destroyed), and the originals are released from the lock contract on the source chain. This is how withdrawals from a Layer 2 rollup back to Ethereum work.

Canonical bridges of optimistic rollups (Arbitrum, Optimism, Base) hold withdrawals for a challenge period of about seven days. During that window anyone can submit a fraud proof if the withdrawal is invalid. The delay is a security feature: it ensures that only valid withdrawals are released. The exact window is set by each rollup and published in its docs (see Sources).

3

Puentes de pools de liquidez

Instead of locking and minting, some bridges keep liquidity pools on several chains. When you deposit tokens on chain A, you receive tokens from the pool on chain B. This is much faster than lock and mint because the user does not wait for the slow canonical path.

Stargate and Across both rely on liquidity provided by third parties, who earn fees from transfers. The trade-off is that these bridges depend on enough liquidity being available on the destination chain: a large transfer can face a worse quote or a wait until liquidity is replenished.

4

Protocolos de mensajería

Cross-chain messaging protocols such as LayerZero and Wormhole provide a general communication layer between blockchains. Beyond moving tokens, they can carry arbitrary data and instructions across chains. Bridges built on them use the messaging layer to verify deposits and trigger releases.

LayerZero uses decentralized verifier networks (DVNs) to validate messages. Wormhole relies on a set of guardian nodes that sign attestations of on-chain events. The security of any bridge built on these layers depends on the verifiers or guardians behaving honestly.

Después de hacer el puente: Gana 7.50% APY en USDC

Once you have bridged USDC to your preferred chain, put it to work. Coinstancy Dollar Savings offers 7.50% APY on USDC. Interest accrues every second and is automatically reinvested. No lock-up period, withdraw anytime.

Comienza a ganar en Coinstancy

Cómo transferir cripto (paso a paso)

The process is similar on most bridges. Here is a walkthrough of a typical bridge interface, using ETH from Ethereum to Arbitrum as the example. Button labels change over time, so follow the meaning of each step rather than the exact wording.

1

Conecta tu billetera

Open the bridge website from a link in the project's official documentation (for the Arbitrum bridge, the Arbitrum docs) and connect your wallet. MetaMask, Rabby, Coinbase Wallet and WalletConnect work with most bridges. Make sure the wallet is on the source chain, the chain you are sending from.

2

Selecciona cadenas de origen y destino

Choose the chain you are sending from and the chain you are sending to. For our example, select Ethereum as the source and Arbitrum One as the destination. Third-party bridges such as Across or Stargate let you pick from many chain pairs.

3

Seleccionar token y cantidad

Elige el token (ETH, USDC, etc.) e introduce la cantidad. El puente muestra la cantidad estimada que recibirás, las comisiones y el tiempo previsto. Mantén suficiente ETH en la cadena de origen para pagar la comisión de gas de la transacción del puente.

4

Aprobar el token (solo ERC-20)

If you are bridging an ERC-20 token such as USDC (not native ETH), you first approve the bridge contract to move your tokens. This is a separate on-chain transaction, once per token per bridge. Your wallet asks you to confirm it and lets you set an exact amount instead of an unlimited approval. Prefer the exact amount.

5

Confirmar la transacción del puente

Start the transfer and confirm it in your wallet. This sends your tokens to the bridge contract on the source chain and costs a gas fee. Before you confirm, check the destination chain, the token, the amount and the receiving address.

6

Espere la confirmación

After the transaction confirms on the source chain, wait for the bridge to process it. Canonical rollup bridges take around 10 to 15 minutes for deposits. Third-party bridges such as Across usually finish within minutes. The bridge interface shows the status. Once it is done, switch your wallet to the destination network to see the tokens.

Seguridad del puente: Proteja sus activos

Bridges are among the most attacked pieces of crypto infrastructure because they hold large pools of locked value. The two largest incidents on record are the Ronin bridge exploit of March 2022 (about $625 million) and the Wormhole exploit of February 2022 (about $325 million). Chainalysis publishes yearly figures on funds stolen from bridges and other protocols (see Sources). The habits below reduce your exposure.

Verifique la URL

Abra los sitios web de puentes desde un marcador o desde un enlace en la documentación oficial del proyecto. Los sitios de phishing copian de cerca las interfaces de puentes populares. Verifique el dominio antes de conectar su billetera. La documentación de cada proyecto enumera su dirección oficial de puente (consulte Fuentes).

Comience con una prueba pequeña

Before bridging a large amount, send a small test transfer first and confirm the tokens arrive on the destination chain. It costs an extra gas fee, but it catches a wrong network, a wrong address or a broken interface before real money is at stake.

Preferir puentes oficiales

For large transfers, use the canonical rollup bridge (Arbitrum, Optimism, Base) whenever the wait is acceptable. These bridges settle on Ethereum. Third-party bridges are faster but add trust assumptions and their own smart contract risk.

Verificar direcciones de contrato

Antes de aprobar un gasto de tokens, compara la dirección del contrato inteligente con la que figura en la documentación oficial del puente. Un contrato malicioso puede vaciar tu cartera. Utiliza un explorador de bloques como Etherscan o Arbiscan para verificar que el contrato esté verificado y coincida.

Tarifas de puente & comparación de velocidad

Bridge costs and transfer times depend on the bridge type, the direction of transfer and network congestion. The table below summarises the main routes. Timing and fees are indicative and come from each project's documentation (see Sources); the bridge interface always shows the live quote. Understanding gas fees helps you estimate the total cost.

Puente Tiempo de depósito Tiempo de retiro Tarifa del Protocolo Modelo de seguridad
Puente Arbitrum Aproximadamente 10 a 15 min Aproximadamente 7 días Solo gas Ethereum L1
Puente Base Aproximadamente 10 a 15 min Aproximadamente 7 días Solo gas Ethereum L1
Puente Optimism Aproximadamente 10 a 15 min Aproximadamente 7 días Solo gas Ethereum L1
Polygon PoS Bridge Tens of minutes Up to a few hours Solo gas Validadores PoS
Across Protocol Minutes Minutes Cotizado por transferencia Oráculo optimista UMA
Stargate Finance Minutes Minutes Cotizado por transferencia DVNs de LayerZero

Note: gas costs move with network congestion. A deposit from Ethereum mainnet costs mainnet gas, which is the largest part of the bill; a Layer 2 transaction costs far less. Check a live gas tracker before you bridge. Third-party protocol fees are charged on top of gas. Weigh the total cost against the yield you expect on the destination chain before moving small amounts.

Problemas comunes de puente & Soluciones

Bridging usually goes smoothly, but things can go wrong. Here are the most common issues and how to fix them.

Transacción atascada (Tokens no llegan)

El problema más común. Tu transacción se confirmó en la cadena de origen, pero no han aparecido tokens en la cadena de destino. Las causas incluyen congestión en la cadena de destino, un retraso en el procesamiento del bridge, o un secuenciador o relayer pausado.

Fix: check the bridge's status page or its transaction history view, where pending transfers are listed. For canonical rollup bridges, allow the full deposit time (around 10 to 15 minutes). If the transaction is confirmed on the source chain, your funds are safe. If nothing has arrived after an hour, contact the bridge's support through the channel listed in its official docs.

Red Incorrecta Seleccionada

Has realizado un puente a la cadena de destino incorrecta (por ejemplo, Optimism en lugar de Arbitrum). Esto no es fatal: aún conservas tus tokens. Deberás realizar un puente de nuevo desde esa cadena a la correcta, lo que conlleva otra comisión.

Fix: switch your wallet to the chain you landed on, confirm the tokens arrived, then bridge them to the right chain. A third-party bridge such as Across handles Layer 2 to Layer 2 routes without passing through Ethereum. To prevent it, re-read the destination chain before you confirm.

Gas insuficiente en la cadena de destino

Your tokens arrived, but you cannot do anything with them because you have none of the native gas token (ETH on Arbitrum and Base, POL on Polygon) to pay for transactions.

Solución: algunos puentes ofrecen una opción de gas en el destino que entrega una pequeña cantidad del token nativo con tu transferencia. Si la omitiste, retira una pequeña cantidad del token de gas desde un exchange centralizado directamente a tu dirección en la cadena de destino. Algunas carteras, como Rabby, también ofrecen una recarga de gas entre cadenas.

Transacción de puente revertida

The bridge transaction reverted on the source chain, which means it failed before your tokens moved. You lose only the gas fee, not the tokens. Common causes: an approval that is too small, a quote that moved beyond your slippage tolerance (on liquidity pool bridges), or a paused bridge contract.

Fix: read the revert reason on a block explorer. If the approval was too small, approve the token again for the right amount. If slippage caused it, try a smaller amount or wait for liquidity to recover. If the contract is paused, wait for the team's announcement or use another bridge.

Gana 7.50% APY en USDC con Coinstancy

Transfiere tus USDC mediante un puente y ponlos a trabajar con Dollar Savings. Los intereses se acumulan cada segundo y se reinvierten automáticamente. Sin periodo de bloqueo, retira cuando quieras.

Comienza a ganar hoy

Preguntas frecuentes

¿Es seguro transferir cripto?
Bridging carries risk because bridges hold or lock large amounts of value and rely on smart contracts that can be exploited. Canonical bridges run by the rollup itself (such as the Arbitrum bridge or the OP Stack bridge used by Optimism and Base) are generally the safest option because they settle on Ethereum. Third-party bridges trade some security for speed and convenience. To reduce risk, verify URLs, start with a small test transaction, and stick to well-known bridges with published audits.
¿Cuánto tiempo tarda el puente?
It depends on the bridge and direction. Deposits from Ethereum to a Layer 2 such as Arbitrum or Base usually take around 10 to 15 minutes, the time needed for the Ethereum transaction to finalize. Withdrawals back to Ethereum through the canonical bridge wait for a challenge period of about seven days on optimistic rollups. Third-party bridges such as Across or Stargate usually complete in minutes in either direction, because they use liquidity on the destination chain instead of the canonical withdrawal path.
¿Cuáles son los puentes más baratos?
Canonical rollup bridges (Arbitrum, Optimism, Base) charge no protocol fee, only gas, which makes them the cheapest option for deposits. Third-party bridges such as Across and Stargate add a fee that is quoted in their interface before you confirm and that changes with liquidity and demand. Compare quotes from two or three bridges before moving a large amount, and include the gas on both chains in your comparison.
¿Puedo transferir cualquier token entre dos cadenas?
Not always. Each bridge supports a specific set of tokens and chain pairs. Canonical rollup bridges move ETH and most ERC-20 tokens, but only between Ethereum and that one Layer 2. Third-party bridges such as Stargate and Across support widely used tokens (ETH, USDC, USDT, WBTC) across several chains, but smaller tokens may not be listed. If your token is not supported, bridge a major token such as ETH or USDC and swap it on the destination chain with a decentralized exchange (DEX).
¿Qué pasa si mi transacción de puente se queda atascada?
First, check the bridge interface or a block explorer for the transaction status. A transfer can look stuck when the destination chain is congested or the bridge is delayed. Most bridges have a status page or support channel. If the transaction is confirmed on the source chain but nothing has arrived, wait at least 30 minutes before troubleshooting. With a canonical bridge, the tokens are safe and arrive once the rollup processes the message. If a third-party bridge cannot complete a transfer, most protocols refund the tokens to your source wallet; the exact rules are in the documentation of each bridge.
¿Necesito gas en ambas cadenas al hacer puente?
Yes. You need the gas token of the source chain (usually ETH) to pay for the bridge transaction. You also need a small amount of the gas token of the destination chain to do anything with your tokens once they arrive. Some bridges offer a gas-on-destination option that delivers a small amount of the native token together with your transfer. If you arrive on a chain with no gas, you can withdraw a small amount of the gas token from a centralized exchange directly to that chain.

Continuar aprendiendo

Explora más guías sobre los fundamentos de DeFi y conceptos cripto.

Pon tus activos puenteados a trabajar

Después de hacer el puente de tus tokens, haz crecer tus tenencias de USDC con Coinstancy. Gana un 7.50% de APY en USDC con Dollar Savings. Los intereses se acumulan cada segundo y se reinvierten automáticamente. Sin período de bloqueo, retira en cualquier momento.

Comienza a ganar en Coinstancy

Fuentes y lecturas adicionales

Las cifras y afirmaciones de esta página se basan en los documentos que aparecen a continuación. Las cifras sensibles al tiempo (tasas, rendimientos, comisiones, datos de mercado) cambian: verifica el valor en vivo en la fuente antes de actuar en consecuencia.

  1. Ethereum.org, Blockchain bridgesethereum.org

    Qué es un puente, los principales diseños de puentes (bloqueo y acuñación, redes de liquidez, mensajería) y las suposiciones de confianza detrás de cada uno.

  2. Ethereum.org, Layer 2ethereum.org

    Cómo funcionan los rollups, por qué las tarifas son más bajas en la Capa 2 y por qué los retiros de los rollups optimistas esperan un período de desafío.

  3. Arbitrum documentationdocs.arbitrum.io

    The canonical Arbitrum bridge, deposit timing and the roughly one-week challenge period for withdrawals to Ethereum.

  4. Optimism documentationdocs.optimism.io

    The OP Stack standard bridge used by Optimism and Base, and the fault-proof window for withdrawals.

  5. Base documentationdocs.base.org

    Bridging to and from Base, and the bridge front ends Base points users to.

  6. Polygon documentationdocs.polygon.technology

    El puente PoS de Polygon, su mecanismo de checkpoint y los tiempos típicos de depósito y retiro.

  7. Documentación de Across Protocoldocs.across.to

    Intent-based bridging, relayers, the UMA optimistic oracle and how Across fees are quoted.

  8. Documentación de Stargatedocs.stargate.finance

    Liquidity pool bridging on top of LayerZero, supported chains and fee parameters.

  9. LayerZero documentationdocs.layerzero.network

    Cross-chain messaging and the decentralized verifier network (DVN) model.

  10. Chainalysis, Crypto Crime Reportchainalysis.com

    Yearly figures on funds stolen in hacks, including the Ronin (March 2022) and Wormhole (February 2022) bridge exploits.

Última revisión: septiembre de 2026. Los enlaces externos se abren en una nueva pestaña; Coinstancy no es responsable de su contenido.

¿Listo para transferir & ganar?

Bridge your crypto to any chain, then earn 7.50% APY on USDC with Coinstancy Dollar Savings. Interest accrues every second and is automatically reinvested. No lock-up, withdraw anytime.